I`m picking up my drum today and would like to know the placement of the cooking racks . I am putting two in . How high off the fire pit should the lowest one be , and what should the top one be at from top edge of barrel . Also , how do you keep the thermometers in place through the barrel .
J.B. Smith
UDS Build
Moderator: TBBQF Deputies
- OSD
- Retired Lawman
- Posts: 7294
- Joined: Sun Jan 14, 2007 6:59 pm
- Location: Fl
- Contact:
Re: UDS Build
If you go to my web site, under the pics section you will find some basic UDS measurement drawings for the different size drums and types of lids that I have used for building UDS's.
Most thermos just require a hole drilled and the thermo usually just has a washer and nut to secure it to the drum.
Most thermos just require a hole drilled and the thermo usually just has a washer and nut to secure it to the drum.
Jim
- 2PUPs
- Cowboy
- Posts: 470
- Joined: Sat Dec 19, 2009 6:17 am
- Location: Boston Mass
- Contact:
Re: UDS Build
Thanks ODS , just what I was looking for , I really appreciate the help . Will post pics of build once I start it . Just picked up my drum , so the work will start shortly .
Weber Smokey Mountain 22.5
Weber Smokey Mountain 18.5
Weber Smokey Mountain 18.5
- 2PUPs
- Cowboy
- Posts: 470
- Joined: Sat Dec 19, 2009 6:17 am
- Location: Boston Mass
- Contact:
- 2PUPs
- Cowboy
- Posts: 470
- Joined: Sat Dec 19, 2009 6:17 am
- Location: Boston Mass
- Contact:
Re: UDS Build
This is my start of my UDS build . Not much done but its a start . Had it in basement due to its snowin outside.
Last edited by 2PUPs on Fri Jan 01, 2010 10:09 am, edited 1 time in total.
Weber Smokey Mountain 22.5
Weber Smokey Mountain 18.5
Weber Smokey Mountain 18.5
- OSD
- Retired Lawman
- Posts: 7294
- Joined: Sun Jan 14, 2007 6:59 pm
- Location: Fl
- Contact:
Re: UDS Build
Don't forget to burn off the liner that is on the inside of that drum. Now would be the best time to do it.
Jim
- 2PUPs
- Cowboy
- Posts: 470
- Joined: Sat Dec 19, 2009 6:17 am
- Location: Boston Mass
- Contact:
Re: UDS Build
Will do the burn tmorrow , thx for heads up .
Weber Smokey Mountain 22.5
Weber Smokey Mountain 18.5
Weber Smokey Mountain 18.5
- 2PUPs
- Cowboy
- Posts: 470
- Joined: Sat Dec 19, 2009 6:17 am
- Location: Boston Mass
- Contact:
Re: UDS Build
Should the intakes extend into the barrel , if so should they be under the fire basket or just to outer edge of it ?
Weber Smokey Mountain 22.5
Weber Smokey Mountain 18.5
Weber Smokey Mountain 18.5
- OSD
- Retired Lawman
- Posts: 7294
- Joined: Sun Jan 14, 2007 6:59 pm
- Location: Fl
- Contact:
Re: UDS Build
I always use short nipples ( 1" - 1 1/2" long ) they don't need to stick into the drum any farther than to put a lock nut on the threads.
These are what I use.................
These are what I use.................
Jim
- 2PUPs
- Cowboy
- Posts: 470
- Joined: Sat Dec 19, 2009 6:17 am
- Location: Boston Mass
- Contact:
- 2PUPs
- Cowboy
- Posts: 470
- Joined: Sat Dec 19, 2009 6:17 am
- Location: Boston Mass
- Contact:
Re: UDS Build
Got my two upper grates in barrel and intake and exhaust done , Just need to get grate for water pan in and put temp gauges in and handles for lid . Also need to cut down the intakes and exhaust a little more , left them long during build , and afix the air intake ball valves ,and finnish the coal basket , and she`ll be ready to go . I added a pic of what it looks like , not your typical UDS , I also have another one I am doing to the normal way of doing it , I just wanted to see how this design would work , I like the unusual things , as you can see from my build . If it dont work , oh well atleast I tried . To all the people that have helped me with info , I really appreciate it , thx so much.
Weber Smokey Mountain 22.5
Weber Smokey Mountain 18.5
Weber Smokey Mountain 18.5
- DATsBBQ
- Deputy
- Posts: 8151
- Joined: Sat Jan 13, 2007 11:15 am
- Location: Yorktown, VA
- Contact:
Re: UDS Build
This latest UDS has thinking I need to start looking for a drum
Deputy Dave
“A wise man can learn more from a foolish question than a fool can learn from a wise answer."-Bruce Lee
“A wise man can learn more from a foolish question than a fool can learn from a wise answer."-Bruce Lee
- 2PUPs
- Cowboy
- Posts: 470
- Joined: Sat Dec 19, 2009 6:17 am
- Location: Boston Mass
- Contact:
Re: UDS Build
HEy DATs , to bad you dont live near me , I can get my drums for free , brand spankin new ones .
Weber Smokey Mountain 22.5
Weber Smokey Mountain 18.5
Weber Smokey Mountain 18.5
- BluDawg
- Chuck Wagon
- Posts: 3671
- Joined: Fri Jul 10, 2009 9:55 am
- Location: Jonesboro,Tx
- Contact:
Re: UDS Build
DATsBBQ wrote:This latest UDS has thinking I need to start looking for a drum
Dave cooking on the drum is a life changing experience. I promise try it once and you will be hooked. I Luv My UDS!!! IF it would only keep the bunk house clean I'd marry the dang thing.
Never met a cow I didn't like with a little salt and pepper.
My Blog: Http://acountryboyeats.blogspot.com
Old Country Over/Under
Webber 22" Performer
ECB
My Blog: Http://acountryboyeats.blogspot.com
Old Country Over/Under
Webber 22" Performer
ECB
- DATsBBQ
- Deputy
- Posts: 8151
- Joined: Sat Jan 13, 2007 11:15 am
- Location: Yorktown, VA
- Contact:
Re: UDS Build
I was thinking more along the lines of getting some friends into cooking. They can't/won't (read married with a ring in the nose instead of on the finger) spend $$$ on decent store bought pit and some have done the ECB trip with bad experiences. Figure if I can get my investment back and some folks into Qing, well it would be worth it.
I'd be willing to bet I'll be holding on to Einstein and Roma longer than I will an UDS.
I'd be willing to bet I'll be holding on to Einstein and Roma longer than I will an UDS.
Deputy Dave
“A wise man can learn more from a foolish question than a fool can learn from a wise answer."-Bruce Lee
“A wise man can learn more from a foolish question than a fool can learn from a wise answer."-Bruce Lee
Return to “Ugly Drum Smokers (UDS)”
Who is online
Users browsing this forum: No registered users and 29 guests