Hey Chuck, Rons Build
Moderator: TBBQF Deputies
- Ratmo
- Wrangler
- Posts: 93
- Joined: Mon Jan 15, 2007 3:22 am
- Location: Peaster
- Contact:
LOL, I was hope'n ya'll would'nt notice that
I try to be a lil different on these thangs an thought to myself, Why Not!!
Prolly gonna start the inside racks today an git the one end plate on. then build the firebox/damper door.
May have to turn that thang over though, run out of upside down weldin rods yesterday
I try to be a lil different on these thangs an thought to myself, Why Not!!
Prolly gonna start the inside racks today an git the one end plate on. then build the firebox/damper door.
May have to turn that thang over though, run out of upside down weldin rods yesterday
If,n it aint one thang, its anuther!
- Ratmo
- Wrangler
- Posts: 93
- Joined: Mon Jan 15, 2007 3:22 am
- Location: Peaster
- Contact:
- nascarchuck
- Retired Lawman
- Posts: 4677
- Joined: Sat Jan 13, 2007 11:34 pm
- Location: Ft. Worth, Texas
- Contact:
- nascarchuck
- Retired Lawman
- Posts: 4677
- Joined: Sat Jan 13, 2007 11:34 pm
- Location: Ft. Worth, Texas
- Contact:
- Ratmo
- Wrangler
- Posts: 93
- Joined: Mon Jan 15, 2007 3:22 am
- Location: Peaster
- Contact:
- DJ
- Chuck Wagon
- Posts: 2899
- Joined: Sat Mar 24, 2007 3:27 pm
- Location: Lewiston, Maine
- Contact:
Lookin forward to the pics!
dj
dj
Ratmo wrote:LOL, you heard rite. Its nearly 3:30am an im fidna put a briskit on for him. Was to busy tryin to finish it out yesterday for pics, i'll git some at daybreak.
http://djstexasstylebbq.com
Caldwell, Texas Native
Caldwell, Texas Native
- Ratmo
- Wrangler
- Posts: 93
- Joined: Mon Jan 15, 2007 3:22 am
- Location: Peaster
- Contact:
- OSD
- Retired Lawman
- Posts: 7294
- Joined: Sun Jan 14, 2007 6:59 pm
- Location: Fl
- Contact:
- JamesB
- Retired Lawman
- Posts: 6215
- Joined: Sun Jan 14, 2007 7:29 am
- Location: Irving, Tx
- Contact:
- nascarchuck
- Retired Lawman
- Posts: 4677
- Joined: Sat Jan 13, 2007 11:34 pm
- Location: Ft. Worth, Texas
- Contact:
- Ratmo
- Wrangler
- Posts: 93
- Joined: Mon Jan 15, 2007 3:22 am
- Location: Peaster
- Contact:
- JamesB
- Retired Lawman
- Posts: 6215
- Joined: Sun Jan 14, 2007 7:29 am
- Location: Irving, Tx
- Contact:
- Ratmo
- Wrangler
- Posts: 93
- Joined: Mon Jan 15, 2007 3:22 am
- Location: Peaster
- Contact:
- DJ
- Chuck Wagon
- Posts: 2899
- Joined: Sat Mar 24, 2007 3:27 pm
- Location: Lewiston, Maine
- Contact:
- JamesB
- Retired Lawman
- Posts: 6215
- Joined: Sun Jan 14, 2007 7:29 am
- Location: Irving, Tx
- Contact:
Return to “Custom Built Pits, Build Your Own Pit & Pit Modifications”
Who is online
Users browsing this forum: No registered users and 95 guests