First build,im looking for advice on how to layout half moon on fire box before cutting please help,here are my calcs.
Link to BBQ Pit Calculator
Fire box half moon opening
Moderator: TBBQF Deputies
-
- Pilgrim
- Posts: 1
- Joined: Mon Jul 24, 2017 5:54 pm
- Contact:
- k.a.m.
- Chuck Wagon
- Posts: 3746
- Joined: Mon Jun 25, 2012 6:38 pm
- Contact:
Re: Fire box half moon opening
Your half moon would be 20" wide x 10" tall. I would increase this to 21" wide x 10.5" tall to add a 1.5" to 2" grease bridge. Make your opening at the top of your firebox this will allow for either the tuning plates or reverse plate to be a continuation of the opening. I hope this helps and if you have anymore questions feel free to ask.
-
- Cowboy
- Posts: 494
- Joined: Tue Jun 07, 2011 12:16 am
- Contact:
Re: Fire box half moon opening
What is a reverse plate KAM??
- k.a.m.
- Chuck Wagon
- Posts: 3746
- Joined: Mon Jun 25, 2012 6:38 pm
- Contact:
Re: Fire box half moon opening
Damon54 wrote:What is a reverse plate KAM??
Reverse flow plate I dropped a word I apologize.
Return to “Custom Built Pits, Build Your Own Pit & Pit Modifications”
Who is online
Users browsing this forum: No registered users and 56 guests