New trailer build. Some new additions. 5/6/17

Custom manufactured BBQ Pits, Do-it-Yourself projects, parts and ideas.

Moderator: TBBQF Deputies

User avatar
k.a.m.
Outlaw
Posts: 2107
Joined: Mon Jun 25, 2012 6:38 pm
Contact:

New trailer build. Some new additions. 5/6/17

Postby k.a.m. » Sat Jul 25, 2015 8:10 am

I have been wanting to build a smaller cooker for Debbie and myself so we can travel further out without bringing Bahama Mama. The cooker will be a 24" x 55" .375 wall cooker.
It will have two doors and no warmer but will have an awning. The firebox is 5/16" plate, the trailer will be made from an old boat trailer I acquired a few months ago.
My son works for blasting company and one of their clients donated my end caps and firebox plates for me, another company donated the pipe. I owe them a brisket or two. :D
I started this build back in December. Life gets in the way and it has been a little slow going but here is where I am at with it. I will post more updates as I move forward.
Image

I started putting the pieces together.
Image

Placing the pieces corner to corner requires stops to hold the last two pieces.
Image

Image

The pieces were not perfectly flat so I earmarked one for my door and worked on it with the big hammer before welding it up.
Image

Image

I finished welding out the firebox and cut out the door, yes I used a cut off wheel. I am low on Acetylene and have to make some cuts today on another project. That is a magnet of who knows how many lbs. of pull. I have learned to not let it hit anything flat or it requires exhausting man hours to release it. :lol:
Image

A pic of my burn through.
Image

Here is a pic of the trailer. I ordered a new 3500 lb. axle for it which should be ready in a couple of weeks. This project will consist of mostly used or old steel I have at my shop. I am not looking for pretty just a cooker that works. ;)
Behind the trailer you can see the cooker against my fence.
Image

Since my door is going to be on the back I decided on horizontal slides. I needed at least 32 Sq. in. of intake so I went with three 2.25" x 6" tall openings, this gives me 40 Sq. in.
Closed.
Image

Open.
Image

The door will be pretty close to Bahama Mama's except for the intakes in the door. I am liking this design. :D
Image

Image

I finished cutting out the back cross members and added the ones I need.
Image

Image

I mounted the tail light boxes, put the front fender toe step on and mounted the jack.
Image

Image

Image

Image

Image

Image

Image

The canopy is 7' 6" long x 6' wide. The top is 7' 6" off the ground this gives me enough head room for a 4' wide wing.
Image

Image

I got my wings built and day by day got them welded up to the trailer.
Image

Image

Image

Image

Image

I got the bracing for the wings done. The low end is right at 6' this will allow me to put a 10' x 10' pop up over the wing.
My braces are attached like Bahama Mama's with no loose parts except keeper clips.
Image

Image

Image

Image

Image

I got the end caps welded on to the chamber it is a long way around 24" pipe with a stick. :lol:
Image

Image

Image

Image

Image

I marked out my doors. It looks like I will have two 25" wide doors with a 3" center bar.
Image

I cut the doors out and got the cooking chamber on its temporary stands. Tomorrow I will mount the firebox and finish the cookers legs.
Image

Image

A clean tip makes for very little slag.
Image

Next was getting the cooker on the trailer. I place a jack under the back cross member and chocked the wheels then used my come along to hoist her up.
Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

I got the firebox mounted and all the cooking chamber supports in place.
The angle iron is a ledger for the firebox to bump up against.
Image

My trusty come along and a lot of clamps I got her true. :D
Image

Image

Image

Image

Image

Image

Image

Image
Last edited by k.a.m. on Sat May 06, 2017 2:58 pm, edited 24 times in total.
Always remember slow and steady wins the race.

Image

My Hybrid cooker.
Competition trailer #2.
User avatar
ChileFarmer
Forum Star
Posts: 6602
Joined: Sun Feb 18, 2007 6:18 pm
Location: Jacksonville,Texas
Contact:

Re: New trailer build.

Postby ChileFarmer » Sat Jul 25, 2015 3:41 pm

Looking good from the start. I know it gonna be a goodun. 2 or 4 pull out grates? Keep us posted. CF :D
OK, get over it, you lost. God bless America

http://s235.photobucket.com/albums/ee175/ChileFarmer" target="_blank
Lots of Sub folders to.

http://curingandsmoking.blogspot.com/" target="_blank
User avatar
k.a.m.
Outlaw
Posts: 2107
Joined: Mon Jun 25, 2012 6:38 pm
Contact:

Re: New trailer build.

Postby k.a.m. » Sun Jul 26, 2015 6:55 pm

Thank You ChileFarmer. :D I will have two lower pull out grates and one upper that I can move left or right. I will most likely build the other upper and just store it.

Yesterday afternoon and today I was able to get a little work done on the cooker.
I installed the drain and started the plenum for my exhaust.
Image

Image

Image

Image

Image

Today I finished up the plenum and mounted the exhaust I also added my rain cap.
Image

Image

Image

Image

Then I started on my doors I was able to finish one and get it tweaked to fit the opening.
Image

Image

Image

Image
Last edited by k.a.m. on Sat Aug 01, 2015 9:33 pm, edited 1 time in total.
Always remember slow and steady wins the race.

Image

My Hybrid cooker.
Competition trailer #2.
User avatar
riseabove50
Rustler
Posts: 219
Joined: Wed Aug 29, 2012 8:12 am
Contact:

Re: New trailer build.

Postby riseabove50 » Mon Jul 27, 2015 10:16 am

You are a talented guy KAM. looking good.
sparctek
Wrangler
Posts: 74
Joined: Fri Dec 05, 2014 11:21 am
Contact:

Re: New trailer build.

Postby sparctek » Mon Jul 27, 2015 3:41 pm

Wow, very nice KAM. I have been wanting to learn how to weld, but I don't think I will ever get to this level of skill.

Nice job!

Jesse
User avatar
k.a.m.
Outlaw
Posts: 2107
Joined: Mon Jun 25, 2012 6:38 pm
Contact:

Re: New trailer build.

Postby k.a.m. » Tue Jul 28, 2015 6:15 am

Thank You riseabove50. :D

Thank You sparctek. :D Welding is a fun hobby you should give it a whirl. A lot of colleges offer classes that can get you started. This way if you feel you are not interested in it you haven't bought a lot of equipment.
Always remember slow and steady wins the race.

Image

My Hybrid cooker.
Competition trailer #2.
User avatar
Finatic
Bandolero
Posts: 581
Joined: Thu May 07, 2015 2:14 pm
Location: Elgin, Texas
Contact:

Re: New trailer build.

Postby Finatic » Tue Jul 28, 2015 8:18 am

Looking great sir! That's an ideal size cooker. I like my 30"x72" offset but I 95% of the time it's half (or less) full when I cook on it.

Enjoy the pics! :happ: Keep us posted.
sparctek
Wrangler
Posts: 74
Joined: Fri Dec 05, 2014 11:21 am
Contact:

Re: New trailer build.

Postby sparctek » Tue Jul 28, 2015 2:49 pm

KAM, that is a great idea. I will have to check schools around me to see what they offer. It will be a good break from all the IT certification training I have to do for work. :D

Thanks KAM,

Jesse
User avatar
k.a.m.
Outlaw
Posts: 2107
Joined: Mon Jun 25, 2012 6:38 pm
Contact:

Re: New trailer build.

Postby k.a.m. » Thu Jul 30, 2015 2:58 pm

Good luck Jesse. :D I look forward to hearing about your adventure. :D
Always remember slow and steady wins the race.

Image

My Hybrid cooker.
Competition trailer #2.
User avatar
Rodcrafter
Wrangler
Posts: 72
Joined: Sat Jun 22, 2013 7:33 am
Location: Orlando
Contact:

Re: New trailer build.

Postby Rodcrafter » Sat Aug 01, 2015 6:14 pm

Nice looking rig you're building. I like the cover too, so much I put one on mine.
Image


Making memories.
User avatar
k.a.m.
Outlaw
Posts: 2107
Joined: Mon Jun 25, 2012 6:38 pm
Contact:

Re: New trailer build.

Postby k.a.m. » Sat Aug 01, 2015 9:30 pm

Thank You Rodcrafter. :D That is a nice set up you have. :D
Always remember slow and steady wins the race.

Image

My Hybrid cooker.
Competition trailer #2.
User avatar
k.a.m.
Outlaw
Posts: 2107
Joined: Mon Jun 25, 2012 6:38 pm
Contact:

Re: New trailer build. Updated 08/01/15

Postby k.a.m. » Sat Aug 01, 2015 9:34 pm

I had yard work this morning and when I was through I got back on the cooker.
Today I put the cooking grate rails in, the deflector and tuning plate rails I also mounted the firebox door.
I am going with two lower pull out grates and one upper pull out on the right.
Image

Image

Image

Image

I am waiting on a few parts to finish out the door.
Image

Image
Always remember slow and steady wins the race.

Image

My Hybrid cooker.
Competition trailer #2.
User avatar
k.a.m.
Outlaw
Posts: 2107
Joined: Mon Jun 25, 2012 6:38 pm
Contact:

Re: New trailer build. Updated 08/02/15

Postby k.a.m. » Sun Aug 02, 2015 7:24 pm

I got the firebox basket rails and basket built today I also got the two lower grate frames built.
I put Anti tippers on the basket.
Image

Image

Image

Image

I built the two lower frames and ran out of material. I will get some more material this week.
Image

Image
Always remember slow and steady wins the race.

Image

My Hybrid cooker.
Competition trailer #2.
User avatar
BluDawg
Chuck Wagon
Posts: 3671
Joined: Fri Jul 10, 2009 9:55 am
Location: Jonesboro,Tx
Contact:

Re: New trailer build. Updated 08/02/15

Postby BluDawg » Mon Aug 03, 2015 2:30 pm

You're doing what you do best Kevin. That's a nice size looks it it might just cook a good brisket or two. I can store it for ya when you git 'er done ;)
Never met a cow I didn't like with a little salt and pepper.
Image
My Blog: Http://acountryboyeats.blogspot.com
Old Country Over/Under
Webber 22" Performer
ECB
User avatar
k.a.m.
Outlaw
Posts: 2107
Joined: Mon Jun 25, 2012 6:38 pm
Contact:

Re: New trailer build. Updated 08/02/15

Postby k.a.m. » Wed Aug 05, 2015 3:54 pm

Thank You Dawg. :D
Let me break her in first. ;) :D
Always remember slow and steady wins the race.

Image

My Hybrid cooker.
Competition trailer #2.

Return to “Custom Built Pits, Build Your Own Pit & Pit Modifications”

Who is online

Users browsing this forum: Bing [Bot] and 1 guest