reverse flow build.
Moderator: TBBQF Deputies
-
- Wrangler
- Posts: 53
- Joined: Fri Sep 13, 2013 8:13 pm
- Contact:
reverse flow build.
Hello to all, I am new to the forum and just wanted to drop a line and say hi. I am in the mist of building my first smoker, I decided on going with a reverse flow design. I am no fabricator buy no means but I do have to say its turning out pretty darn good! I will add some build pics as soon as I figure out how to work this gizmo. Please all the advise and input is greatly appreciated!
Last edited by mikegros82 on Sat Dec 21, 2013 9:36 am, edited 1 time in total.
- CypertJ
- Bandolero
- Posts: 570
- Joined: Thu Sep 23, 2010 1:17 pm
- Location: Canton, TX
- Contact:
Re: HOWDY FOLKS!!!! NEWBIE HERE FROM KEMP TX.
Welcome to the forum, and good luck with the build. Can't wait to see some pictures.
-
- Wrangler
- Posts: 53
- Joined: Fri Sep 13, 2013 8:13 pm
- Contact:
Re: HOWDY FOLKS!!!! NEWBIE HERE FROM KEMP TX.
I have tried to upload pix but it says too large I have also tried to download image software but no luck I will keep trying to get them on here I see you are in canton were not too far we need to sample some bbq lol.
-
- Wrangler
- Posts: 53
- Joined: Fri Sep 13, 2013 8:13 pm
- Contact:
-
- Wrangler
- Posts: 53
- Joined: Fri Sep 13, 2013 8:13 pm
- Contact:
-
- Wrangler
- Posts: 53
- Joined: Fri Sep 13, 2013 8:13 pm
- Contact:
-
- Wrangler
- Posts: 53
- Joined: Fri Sep 13, 2013 8:13 pm
- Contact:
-
- Wrangler
- Posts: 53
- Joined: Fri Sep 13, 2013 8:13 pm
- Contact:
Re: HOWDY FOLKS!!!! NEWBIE HERE FROM KEMP TX.
I still have to pick up the rest of the material to build the fire box and reverse flow plate
-
- Wrangler
- Posts: 53
- Joined: Fri Sep 13, 2013 8:13 pm
- Contact:
- bullypitbbq
- Rustler
- Posts: 201
- Joined: Sun Sep 01, 2013 12:51 am
- Location: Abilene, TX.
- Contact:
Re: HOWDY FOLKS!!!! NEWBIE HERE FROM KEMP TX.
Are gonna put door stops where its easier to grab ur handles when closing the doors?
Just curious
Just curious
You only live once, so live every day as if it were your last.
-
- Wrangler
- Posts: 53
- Joined: Fri Sep 13, 2013 8:13 pm
- Contact:
Re: HOWDY FOLKS!!!! NEWBIE HERE FROM KEMP TX.
Yes sir I do plan on adding stops later on in the build. I have not figured out a design for some yet any ideas?
- Babybluebbq
- Rustler
- Posts: 105
- Joined: Wed Jul 17, 2013 12:55 pm
- Location: Springtown, tx
- Contact:
Re: HOWDY FOLKS!!!! NEWBIE HERE FROM KEMP TX.
mikegros82 wrote:Yes sir I do plan on adding stops later on in the build. I have not figured out a design for some yet any ideas?
I used horseshoes for mine, seen a nice one that used axes( just welded the axe head and rest on the handle)
- ChileFarmer
- Forum Star
- Posts: 6602
- Joined: Sun Feb 18, 2007 6:18 pm
- Location: Jacksonville,Texas
- Contact:
Re: HOWDY FOLKS!!!! NEWBIE HERE FROM KEMP TX.
Welcome to the forum, sure looks like you got it going on. Nice. CF
OK, get over it, you lost. God bless America
http://s235.photobucket.com/albums/ee175/ChileFarmer" target="_blank
Lots of Sub folders to.
http://curingandsmoking.blogspot.com/" target="_blank
http://s235.photobucket.com/albums/ee175/ChileFarmer" target="_blank
Lots of Sub folders to.
http://curingandsmoking.blogspot.com/" target="_blank
-
- Wrangler
- Posts: 53
- Joined: Fri Sep 13, 2013 8:13 pm
- Contact:
Re: HOWDY FOLKS!!!! NEWBIE HERE FROM KEMP TX.
Thank you for the welcome ! I am trying but the budget keeps getting in the way lol. But I will be picking up the quarter inch plate for the fire box and the reverse flow plate tomarrow so this weekend I should have more pics for you guys.
-
- Wrangler
- Posts: 53
- Joined: Fri Sep 13, 2013 8:13 pm
- Contact:
Re: HOWDY FOLKS!!!! NEWBIE HERE FROM KEMP TX.
Howdy folks sorry it has been awhile since my last post but everyday life got in the way of my project but I am back to working on it again I have all the materials now and will post pics of my progress as I go! Again any suggestions is greatly appreciated
Return to “Custom Built Pits, Build Your Own Pit & Pit Modifications”
Who is online
Users browsing this forum: No registered users and 85 guests