Page 1 of 1
1st UDS build advice request
Posted: Sat Jul 01, 2017 4:14 am
by Samvan77
Hi all, I am a newbie from across the pond seeking some advice please. Last week I have started my first UDS build however due to poor research on my behalf I bought a drum that was painted and lacquered inside out. I have hung out out once and sanded it back to bare metal surface on the inside and I am going to repeat this for the outside today. I have attached photos for reference. My question to is this, would you say the inside surfaces are now safe to season and smoke food in? Or do you think I should burn it and sand again?
Sent from my Pixel XL using Tapatalk
Re: 1st UDS build advice request
Posted: Sat Jul 01, 2017 8:44 am
by OldUsedParts
Welcome, Sam, do you have any idea what the drum was used for before you got it ?orig contents?
Here's a thread with some previous posts about UDS builds that you might want to browse thru also.
search.php?keywords=UDS+Builds&terms=all&author=&sc=1&sf=all&sr=posts&sk=t&sd=d&st=0&ch=300&t=0&submit=SearchGOOD LUCK
Re: 1st UDS build advice request
Posted: Sat Jul 01, 2017 9:17 am
by Samvan77
Hi thanks for the welcome. The drums was used for shipping fruit juice concentrates. It had a green paint/lacquered coating inside which I stripped off to get the drum back to a bare metal surface. So I am hoping that this will now be ready to be seasoned.
Sent from my Pixel XL using Tapatalk
Re: 1st UDS build advice request
Posted: Sat Jul 01, 2017 9:34 am
by OldUsedParts
This is just a guess on my part and in no way am I an expert - - - - However, I would think
that if you do a couple of good burns in it and then season it then it should be OK for BBQ'n and Smokin'
Re: 1st UDS build advice request
Posted: Mon Jul 03, 2017 7:38 am
by Swamp Donkeyz BBQ
Do a good hot open top burn in it. Then season it like any other pit.