Vintage Mr. Meat Smoker parts
Moderator: TBBQF Deputies
-
- Pilgrim
- Posts: 1
- Joined: Sat May 13, 2017 10:40 am
- Contact:
Vintage Mr. Meat Smoker parts
I have a pretty old Mr. Meat smoker similar to this one: https://goo.gl/images/ZNVq27. I lost one of the wire brackets that hangs down from the top to hold the water pan. Anyone have any leads on where I can get a replacement?
- OldUsedParts
- Deputy
- Posts: 20756
- Joined: Sun May 15, 2011 7:09 pm
- Location: Montgomery, Texas
- Contact:
Re: Vintage Mr. Meat Smoker parts
Should be easy enuff to frabricate can you post up a pic of one of the other ones
I am determined to sustain myself as long as possible & die like a soldier who never forgets what is due to his own honor & that of his country—Victory or Death. William Barret Travis - Lt. Col. comdt "The Alamo"
- OldUsedParts
- Deputy
- Posts: 20756
- Joined: Sun May 15, 2011 7:09 pm
- Location: Montgomery, Texas
- Contact:
Re: Vintage Mr. Meat Smoker parts
Had a chance to look at some of those pics in the link and it seems to me that you can go to the hwd store/Home Depot and pick up a L bracket/shelf bracket or even some aluminum stock depending on your requirements and with the help of a hack saw and drill - - - AND proper location - - - you could bolt them inside at the necessary location and "Voila".
There are many options such as
Shelf or L brackets that come in many lengths
Just straight stock that you can bend to your specs
Or cut off some angle iron, drill holes and mount if it will reach far enuff to hold the water pan.
There are many options such as
Shelf or L brackets that come in many lengths
Just straight stock that you can bend to your specs
Or cut off some angle iron, drill holes and mount if it will reach far enuff to hold the water pan.
I am determined to sustain myself as long as possible & die like a soldier who never forgets what is due to his own honor & that of his country—Victory or Death. William Barret Travis - Lt. Col. comdt "The Alamo"
Return to “Ugly Drum Smokers (UDS)”
Who is online
Users browsing this forum: No registered users and 4 guests