Been wanting to get a smoker for a while now, and saw this one being given away for free. Pretty rusted when I first looked at it. But once I took it home and began to clean it up it was a whole lot worst than I thought.
Is it worth trying to fix? I was thinking I could get some thing to patch it up with maybe some aluminum sheets and use some nontoxic baking clay to seal the gaps. That or just buy a whole new bottom for $60.
Is it worth trying to fix?
Moderator: TBBQF Deputies
-
- Pilgrim
- Posts: 2
- Joined: Wed Oct 23, 2019 5:56 pm
- Contact:
- Rambo
- Deputy
- Posts: 8473
- Joined: Mon Apr 02, 2012 10:39 pm
- Location: Lufkin, TEXAS
- Contact:
Re: Is it worth trying to fix?
There is a member here that goes by KAM. You might find a post in the pit forum he replied on and send him a private message
- spacetrucker
- Chuck Wagon
- Posts: 3466
- Joined: Sun Jun 02, 2013 4:36 pm
- Location: Round Rock Texas
- Contact:
Re: Is it worth trying to fix?
first, Greetings and a warm welcome to the forum!!
one persons trash is another's treasure I am more or less with ya on the line of thinking....
your capabilities and resources will make the determination on fix or ?
of coarse K.A.M. is a super resource and a nice guy to help with your decision
one persons trash is another's treasure I am more or less with ya on the line of thinking....
your capabilities and resources will make the determination on fix or ?
of coarse K.A.M. is a super resource and a nice guy to help with your decision
Don't count every day, Make every day Count
Good Cue to ya..
Vernon
FEC-100
Webber kettle 22"
Webber genesis
Blackstone pizza oven
Good Cue to ya..
Vernon
FEC-100
Webber kettle 22"
Webber genesis
Blackstone pizza oven
-
- Pilgrim
- Posts: 2
- Joined: Wed Oct 23, 2019 5:56 pm
- Contact:
Re: Is it worth trying to fix?
Thanks y’all and for the warm welcome! I’ll look for K.A.M and see what he think.
As for capabilities I don’t have a welder nor the knowledge so won’t be able to do anything like that.
As for capabilities I don’t have a welder nor the knowledge so won’t be able to do anything like that.
- OldUsedParts
- Deputy
- Posts: 21615
- Joined: Sun May 15, 2011 7:09 pm
- Location: Montgomery, Texas
- Contact:
Re: Is it worth trying to fix?
JohnTBucket wrote:Thanks y’all and for the warm welcome! I’ll look for K.A.M and see what he think.
As for capabilities I don’t have a welder nor the knowledge so won’t be able to do anything like that.
Getting KAM's opinion on this is a very good idea regardless of what you decide, however, after seeing your "capabilities" reply, I'm thinking that fixing this one may not be the best idea for "you".
I am determined to sustain myself as long as possible & die like a soldier who never forgets what is due to his own honor & that of his country—Victory or Death. William Barret Travis - Lt. Col. comdt "The Alamo"
-
- Cowboy
- Posts: 309
- Joined: Wed May 05, 2010 3:21 pm
- Location: Torrance California 2 miles from the beach
- Contact:
Re: Is it worth trying to fix?
I think you'd be better off starting with a clean 55gal drum and make a drum smoker. Drums can be bought new for pretty cheap and can be found free. But be sure you know what was in the drum before you use it for a smoker. There are plenty of plans online for drum smokers. Even with purchasing a new drum, I think you can keep it under $200 and probably closer to 100.
[i][b][color=#0000BF]Chuck[/color][/b][/i]
***************
RecTec RT-700 Platinum Pkg
Bubba Keg grill/smoker
Capt-n-Cook 600" gasser grill
26" Weber Kettle
***************
RecTec RT-700 Platinum Pkg
Bubba Keg grill/smoker
Capt-n-Cook 600" gasser grill
26" Weber Kettle
Return to “Pellet Cookers and Smokers”
Who is online
Users browsing this forum: No registered users and 37 guests