Gator Pellet Pit
Posted: Fri Jul 07, 2017 10:08 am
Not sure who, if anyone, has seen it, but for those who like Gators, they're developing a pellet pooper. I expect cost will be high, like most things Rich does, but there is no disputing his quality. Just thought I'd share!
From their Facebook page:
ANNOUNCEMENT: Gator Pit is in the design/fabrication phase of what will be our newest GATOR PIT PELLET SMOKER & GRILL. You heard right. For years folks have been asking if I was ever going to come out with a Pellet cooker with the same quality materials and craftsmanship as our heavy duty smokers and grills. And, we are going to meet our customers demands and expectations. 1/4" thick x 20" diameter and 24" diameter x 36" long Gator Pellet Cookers will soon be offered to our customers in our product line of Gators. Upper and lower angle framed sliding meat racks, Tel Tru Gator gauges, fully flanged doors, large commercial 2" x 5" heavy duty casters, lower storage area, stainless steel cool touch handles, all steel front shelf, grease drain, etc.... This WILL NOT be that China made, thin walled, light duty steel constructed pellet cooker you get today.
It will be a GATOR PIT. Expectations to offer larger/commercial sizes with dual hoppers in the near future. What our Hopper offers:
Larger Hopper Capacity (35lbs Total)
Hopper Baffling System (Directs pellets into auger more easily)
36,000 BTUs
PID controller set in 5 degree increments
Temp range: 160°F-450°F
2rpm auger
Upgraded 9-hole burnpot; creates a more efficient burn
Combustion fan facilitates a natural convection throughout the grill area
Smoke Setting & Grill Setting
Improved Hot Rod Design
100% Digitally Controlled
Requires 110v outlet; ±10%
Extra Long 5ft long RTD Probe
5ft Meat Probe
Complete Instructions
Operating Voltage: AC 110V ±10%, 60Hz
From their Facebook page:
ANNOUNCEMENT: Gator Pit is in the design/fabrication phase of what will be our newest GATOR PIT PELLET SMOKER & GRILL. You heard right. For years folks have been asking if I was ever going to come out with a Pellet cooker with the same quality materials and craftsmanship as our heavy duty smokers and grills. And, we are going to meet our customers demands and expectations. 1/4" thick x 20" diameter and 24" diameter x 36" long Gator Pellet Cookers will soon be offered to our customers in our product line of Gators. Upper and lower angle framed sliding meat racks, Tel Tru Gator gauges, fully flanged doors, large commercial 2" x 5" heavy duty casters, lower storage area, stainless steel cool touch handles, all steel front shelf, grease drain, etc.... This WILL NOT be that China made, thin walled, light duty steel constructed pellet cooker you get today.
It will be a GATOR PIT. Expectations to offer larger/commercial sizes with dual hoppers in the near future. What our Hopper offers:
Larger Hopper Capacity (35lbs Total)
Hopper Baffling System (Directs pellets into auger more easily)
36,000 BTUs
PID controller set in 5 degree increments
Temp range: 160°F-450°F
2rpm auger
Upgraded 9-hole burnpot; creates a more efficient burn
Combustion fan facilitates a natural convection throughout the grill area
Smoke Setting & Grill Setting
Improved Hot Rod Design
100% Digitally Controlled
Requires 110v outlet; ±10%
Extra Long 5ft long RTD Probe
5ft Meat Probe
Complete Instructions
Operating Voltage: AC 110V ±10%, 60Hz