Build Thread
Moderator: TBBQF Deputies
- jlabolt
- Rustler
- Posts: 135
- Joined: Wed Apr 02, 2008 4:26 pm
- Location: Hanover, IN
- Contact:
Build Thread
Got some free time this weekend to work on my build project. The tanks ready for the sandblaster. I wasn't going to have it sandblasted, but after reading some of these posts it seems like the right way to go.
First cut for the firebox.
Had a little spring back on one of the doors, but we got fixed pretty easy. I bought the hinges from kck.com and they worked out great. Doors still need to be trimmed up.
Firebox is all cut out and ready to be welded.
Hopefully I'll have it finished by the first of June at the latest. Can't do much this weekend as it's my sons first birthday and mother's day. Hoping to at least get it back from the sandblaster though.
First cut for the firebox.
Had a little spring back on one of the doors, but we got fixed pretty easy. I bought the hinges from kck.com and they worked out great. Doors still need to be trimmed up.
Firebox is all cut out and ready to be welded.
Hopefully I'll have it finished by the first of June at the latest. Can't do much this weekend as it's my sons first birthday and mother's day. Hoping to at least get it back from the sandblaster though.
Butts-N-Racks Competition BBQ
Homemade Reverse Flow
UDS
Chargriller w/ side firebox
Homemade Reverse Flow
UDS
Chargriller w/ side firebox
- OSD
- Retired Lawman
- Posts: 7294
- Joined: Sun Jan 14, 2007 6:59 pm
- Location: Fl
- Contact:
- JamesB
- Retired Lawman
- Posts: 6215
- Joined: Sun Jan 14, 2007 7:29 am
- Location: Irving, Tx
- Contact:
Re: Build Thread
Good start! Keep us posted as you progress.
- NewBQ
- Outlaw
- Posts: 2078
- Joined: Tue Apr 21, 2009 7:12 pm
- Location: Garland, Texas
- Contact:
Re: Build Thread
Youre not wasting any time on this, should be done in no time!
- DJ
- Chuck Wagon
- Posts: 2899
- Joined: Sat Mar 24, 2007 3:27 pm
- Location: Lewiston, Maine
- Contact:
- jlabolt
- Rustler
- Posts: 135
- Joined: Wed Apr 02, 2008 4:26 pm
- Location: Hanover, IN
- Contact:
Re: Build Thread
I'm looking into paint for my pit. I know about the rustoleum high temp, in fact, my UDS is painted with it, but I'm looking around for a good high temp primer. Everything I see is a zinc dust primer. Anyone know what "zinc dust" has to do with it and if it's ok to use on bbq grill.
Butts-N-Racks Competition BBQ
Homemade Reverse Flow
UDS
Chargriller w/ side firebox
Homemade Reverse Flow
UDS
Chargriller w/ side firebox
-
- Outlaw
- Posts: 1226
- Joined: Fri Apr 04, 2008 9:54 am
- Location: COMANCHE, TEXAS
- Contact:
Re: Build Thread
Looking good; you will be dang proud of that when it's complete and HAPPY First Birthday to your son Only thing greater is the first and continous Birthdays of your Grandkids.
BAR "G"
-
- Outlaw
- Posts: 1226
- Joined: Fri Apr 04, 2008 9:54 am
- Location: COMANCHE, TEXAS
- Contact:
Re: Build Thread
jlabolt wrote:I'm looking into paint for my pit. I know about the rustoleum high temp, in fact, my UDS is painted with it, but I'm looking around for a good high temp primer. Everything I see is a zinc dust primer. Anyone know what "zinc dust" has to do with it and if it's ok to use on bbq grill.
Short and Sweet; NO DON'T USE IT
BAR "G"
- jlabolt
- Rustler
- Posts: 135
- Joined: Wed Apr 02, 2008 4:26 pm
- Location: Hanover, IN
- Contact:
Re: Build Thread
Thanks Bar "G". I was thinking the same thing, but thought I'd ask first
Butts-N-Racks Competition BBQ
Homemade Reverse Flow
UDS
Chargriller w/ side firebox
Homemade Reverse Flow
UDS
Chargriller w/ side firebox
-
- Pilgrim
- Posts: 36
- Joined: Tue Dec 02, 2008 10:45 am
- Contact:
Re: Build Thread
Great start to your build! I can't wait to see pictures when you get it rolling. I have 2-250 gal propane tanks right now that I will be making into pits this summer. On the pit below, that I just finished, I bought 1 gallon 1200 degree paint at sherwin-williams. They only sell it in quarts and it was pretty cheap. I was pretty impressed with the way It shot. I used a HVLP gun and thinned with xylene. It turned out pretty good.
Good Luck With Your Build!
Good Luck With Your Build!
Just my opinion, I could be wrong!
- jlabolt
- Rustler
- Posts: 135
- Joined: Wed Apr 02, 2008 4:26 pm
- Location: Hanover, IN
- Contact:
Re: Build Thread
Been working hard a few hours at a time and it's slowly paying off. Much thanks go out to my buddy Stan for accommodating me in his garage for this lengthy period and giving me the ins and outs of stick welding. Couldn't have gotten this far without him. I was going to send it off to the sandblaster, but one of the maintenance guys at said his cousin had and he said I could use it. Picked up the sand today and hopefully, weather permitting, get it blasted and painted Sunday.
Firebox is taking shape. Just some finishing work left and mounting of course.
Welding some trim to seal her up.
Equipment and accommodations.
Trimmed in door.
First Smoke??? Just a small fire to help with odor, although, it's not really noticeable. I got lucky on that one I guess. Thought I'd do a little burn just to be on the safe side.
Firebox is taking shape. Just some finishing work left and mounting of course.
Welding some trim to seal her up.
Equipment and accommodations.
Trimmed in door.
First Smoke??? Just a small fire to help with odor, although, it's not really noticeable. I got lucky on that one I guess. Thought I'd do a little burn just to be on the safe side.
Butts-N-Racks Competition BBQ
Homemade Reverse Flow
UDS
Chargriller w/ side firebox
Homemade Reverse Flow
UDS
Chargriller w/ side firebox
- OSD
- Retired Lawman
- Posts: 7294
- Joined: Sun Jan 14, 2007 6:59 pm
- Location: Fl
- Contact:
- NewBQ
- Outlaw
- Posts: 2078
- Joined: Tue Apr 21, 2009 7:12 pm
- Location: Garland, Texas
- Contact:
Re: Build Thread
Movin right along Bolt.
It'll sure feel good to look back when it's finished.
It'll sure feel good to look back when it's finished.
- jlabolt
- Rustler
- Posts: 135
- Joined: Wed Apr 02, 2008 4:26 pm
- Location: Hanover, IN
- Contact:
Re: Build Thread
It's feeling pretty good already. Can't imagine the end feeling.
Butts-N-Racks Competition BBQ
Homemade Reverse Flow
UDS
Chargriller w/ side firebox
Homemade Reverse Flow
UDS
Chargriller w/ side firebox
- JamesB
- Retired Lawman
- Posts: 6215
- Joined: Sun Jan 14, 2007 7:29 am
- Location: Irving, Tx
- Contact:
Re: Build Thread
Not much longer and we'll be seeing pics of the food coming off of it!
Return to “Custom Built Pits, Build Your Own Pit & Pit Modifications”
Who is online
Users browsing this forum: No registered users and 70 guests