Hello
I took a part time job using someone's smoker.
it 6 ft wide by 24" round smoker
Fire box is 22.5"wide, 15.5 deep and 18.25 high
air opening is square 3.5 by 2.5
The opening is half moon opening from fire box to smoker is
20" wide and 7.25" tall
Is the opening to the smoker to big?
There are no tuning plates in the smoker?
Having a hard time keeping the heat towards the lower rack in the smoker, lower rack is around 230 and the top rack is running 300 to 325.
Any help or ideas would be great. Thank you
Need some help
Moderator: TBBQF Deputies
-
- Pilgrim
- Posts: 2
- Joined: Mon Oct 08, 2018 4:15 pm
- Contact:
- Papa Tom
- Deputy
- Posts: 6774
- Joined: Sat Jun 30, 2007 9:40 am
- Location: Oak Point, TX
- Contact:
Re: Need some help
With this info all I can recommend is to extend the flue down in the cooking chamber to the level of the lower grate.
This will force the heat level down.
This will force the heat level down.
tarde venientibus ossa....
-
- Pilgrim
- Posts: 2
- Joined: Mon Oct 08, 2018 4:15 pm
- Contact:
Re: Need some help
Thank you. I will try that. do you think tuning plates would help?
Return to “Custom Built Pits, Build Your Own Pit & Pit Modifications”
Who is online
Users browsing this forum: No registered users and 83 guests