Was thinking of 1 door. Make the top cut, weld hinges then make other cuts. Probably will need a counter weight. The calculator is giving me a stack height of 25" with a 4" pipe, it will be mounted on the side.
Plan on doing two racks, well 1 and a half.
Would 3/8" plate be fine for the RF plate? Or would 1/4" be better
I plan on putting a 2" pipe for a drain at the opposite side of the FB. Also if I can find one add a screw adjustment to keep that end lower.
![Image](https://uploads.tapatalk-cdn.com/20171227/75c2971c06746e8ad3ca71ea11c02416.jpg)
Sent from my SM-N950U using Tapatalk