Need to build a upper rack

Custom manufactured BBQ Pits, Do-it-Yourself projects, parts and ideas.

Moderator: TBBQF Deputies

gonzz
Pilgrim
Posts: 8
Joined: Wed Jul 06, 2016 5:22 pm
Contact:

Need to build a upper rack

Postby gonzz » Wed Jul 06, 2016 5:49 pm

Any pictures of upper rack builds? I want to be able to pull the rack and have it stay in place not flip. Do you use a C channel and square tubing on the rack? Thanks for any info.
User avatar
k.a.m.
Outlaw
Posts: 2108
Joined: Mon Jun 25, 2012 6:38 pm
Contact:

Re: Need to build a upper rack

Postby k.a.m. » Wed Jul 06, 2016 8:44 pm

I use 1.5" x 1.5" angle for my rails. I use 1" x 1" x 1/4" angle for my grate frames. Once the grates are built I place them on the rails and put a 1/16" spacer on the grate then I add a 1" x 1/4" flat bar and weld it to the angle iron this makes my anti tippers.
viewtopic.php?f=67&t=25909&start=60
I hope this helps. :D
Always remember slow and steady wins the race.

Image

My Hybrid cooker.
Competition trailer #2.
User avatar
Finatic
Bandolero
Posts: 581
Joined: Thu May 07, 2015 2:14 pm
Location: Elgin, Texas
Contact:

Re: Need to build a upper rack

Postby Finatic » Thu Jul 07, 2016 6:57 am

I have C channel on my upper racks in my offset smoker and angle iron racks on my new charcoal smoker. I prefer using angle iron for the rails as k.a.m. explained over C channel. You have more room for expansion and ultimately get a tighter fit with angle iron. C channel doesn't have a very big lip for the grate frame to rest on so you have to fit it fairly tight. When the smoker gets hot the grates tend to stick a little. I'd recommend using the angle iron rails with an anti-tip plate.

Return to “Custom Built Pits, Build Your Own Pit & Pit Modifications”

Who is online

Users browsing this forum: No registered users and 2 guests